Rifle Scabbards

Have a scabbard custom made to fit your favorite rifle, just E-mail 
me
with a description of what you would like and I will build it for you.

Plain Carbine Scabbard   # 1

Made for a model 94 Winchester
lever action 30 30 ,

O P scabbard.jpg (39647 bytes) # 2
Same as above, but in Full Basket Weave
pattern and with black inset initials.
30 30 CARVED.jpg (32438 bytes) # 3
This one is made for a Winchester model 94
with a snow flap and with full floral carving
scabardwfcar.jpg (93777 bytes) # 4
Made with a snow flap & Full Basket Weave
stamping.
plain scabbard.jpg (21034 bytes) Scabbard for rifle with a scope # 5

Please tell me the make & model of your rifle &
I will custom make a scabbard to fit it
bypodrifle.jpg (120521 bytes) # 6
Fully Floral Carved scabbard to fit
a rifle with a scope & a bipod
Tom N.jpg (585775 bytes)
Click to see more detail
Deluxe scabbard  # 7

Scabbard for rifle with scope with 16 plate
rawhide edge braiding all around outside edge
flap scab.jpg (32970 bytes) # 8
This one is made with a snow flap for a scope
mounted rifle,
# 9
I will custom make a scabbard
to fit your rifle.
double flap scab.jpg (54532 bytes) # 10
This one is made with a double snow flap,
to fully encase the stock,
for rifle with
scope.
Flap scabbard.jpg (2541833 bytes) # 11
This one is made with a snow flap for a scope
mounted rifle, but with scope down
davetomas 1.jpg (225984 bytes) # 12
This scabbard made for a 28 gauge shotgun,
complete with a steel lining, a removable boot,
a removable shoulder strap and straps to hang
it from a saddle.


   Click image to see more detail

# 13
In order to give a better understanding
of how my scabbards are constructed
click on the photo at left

 


 Click image to see more detail
# 14
This is an example of a  ruff-out scabbard
for a 30 30 along with a  ruff-out scabbard
for a scope mounted rifle & a set of
saddlebags all matching.
RP case.jpg (406019 bytes)

RP case 12.jpg (773763 bytes)
Barrel case for shotgun    # 15


Barrel case made in 4 ox bridle leather with a soft
leather lining that will not mar the finish on your
favorite shotgun. This case was made to hold a
12 gage, a 20 gage, a 28 gage and a 410 gage barrel.
It has a shoulder strap and a handle to carry on the
shooting range.
Scabbard&chaps.jpg (474893 bytes) Matching set    # 16

A pr of 5 snap batwing chaps with a matching
scabbard for a scope mounted rifle. Scabbard
built to be mounted in a scope down procession.

sharpsscabbard.jpg (150642 bytes) Steel Lined Scabbard    #17
Steel Lined Scabbard
 complete with a boot 
for a 45-70  Sharps. The steel plate protects
the action of your rifle.

Tell me the make & model of your rifle
& I will custom make a scabbard to fit it.


Click image to see more detail

# 18

Scabbard with cartridge pouch on side.

preasen scab.jpg (30158 bytes) # 19
This is a example of my  Presentation
Scabbards
for rifles with scopes
made
with full basket stamping.
Steel Lined Scab.jpg (171938 bytes)
Click image to see more detail
Steel Lined Scabbard   # 20
Can be used on a saddle or as a carrying
case.
The steel plate protects the action
and scope of your rifle.

Please tell me the make & model of your
rifle & I will make a steel lined scabbard
to fit it.

Boot scabbard 14.jpg (1387473 bytes)
Boot scabbard 13.jpg (1871072 bytes)
# 21
This scabbard is made with a boot,
to fully encase the stock,
for a rifle
with a scope.


The scabbard & boot are laced with
Appliqué braiding in rawhide as seen in
the photo at left
rawlacedsc.jpg (718573 bytes)
Click image to see more detail
# 22

This scabbard is fully lined in soft glove
leather, it also has a steel lining over the
scope along with a double snow flap. I put
Applique braiding down the the full length
of barrel and laced the bottom of the scabbard
with rawhide, it has a handle to carry as well
as saddle straps.
rawscab3.jpg (1900465 bytes)
Defender 8.jpg (4917729 bytes)
# 23
This scabbard has a snow flap along with a
full basket weave pattern. I put Applique 
braiding in rawhide down the full length of
the barrel on this scabbard.

The photo at left shows the Applique braiding
in Rawhide that I do on some of my scabbards
Rifle carrying case    # 24
This rifle case is made to be hung from
the front of the saddle straight down.
rifle case.jpg (25651 bytes) Rifle carrying case    # 25
This rifle case in 8 oz bridle leather. The
flap is fastened with a buckle. Case is
fully basket stamped and has the
customers name on the side.
 

riflecase 2.jpg (46452 bytes)

# 26
Made with a handle & saddle straps this case
can be used on a saddle as well as a carrying case.
saddle. The flap is fastened with a buckle.

 
# 27
Please tell me the make & model of your rifle
& I will custom  make  a scabbard to fit it.
defender3.jpg (350562 bytes)
Click image to see more detail
Shoulder holster
for Defender Shotgun
    #28
I designed this holster for fishermen, hikers,
or anyone needing to carry a shotgun for
protection from bear or cougar in the bush

This holster allows you to carry a Defender
Shotgun with the barrel up and the grip next
to your hand. The top of holster is closed
stopping anything from entering the barrel.
The butt of the shotgun rests in a pocket, just
above your  hand, making it very fast to draw 
and easy to carry, even with a back-pack.

sokler1.jpg (3252040 bytes) Shoulder holster
for Defender Shotgun   # 29
shotgunholster.jpg (60921 bytes) Shoulder holster for shotgun   # 30

Made the same as the holster above but for a
shotgun with a full stock
.

Please tell me the make & model of your shotgun
& I will  make a scabbard to fit it.

 

Nothing better for prospectors,
fishermen or back-packers.

Back-packer Scabbard    # 31

This scabbard is made for a model 94
Winchester carbine.
Daly back-packer 1.jpg (247944 bytes) Back-packer Scabbard   # 32

This scabbard was made for a bolt action rifle,
with a steel lining over the action and a removable
boot to fully encase the rifle.
mark 4.jpg (210054 bytes) Back-packer Scabbard    # 33

This scabbard was made for a Stoeger supreme
12 gauge side by side, it is fully lined with soft
chap leather, with a snow flap. The pouch on the
shoulder strap holds 5   12 gauge cartridges.
The fastening on the snow flap is a dee with a
leather strap running through for fast
removal.
12 ga pouch.jpg (314001 bytes) Cartridge pouch # 34

Close-up of cartridge pouch. I made this pouch
to fit 12 gage shells. It will go on your belt, shoulder
strap or in your pocket. Very handy to keep a few
extra cartridges.
cartrage pouch 3.jpg (982994 bytes) Cartridge pouch # 35

Cartridge pouch for 45/ 70
S 45-70.jpg (513502 bytes) Cartridge slide    # 36


Cartridge  slide for 10 45/70 cartridges to go on belt
Back-packer Scabbard   # 37

This scabbard  can be made for your favorite
scope mounted rifle.

This scabbard is designed to be used on a saddle
or it can be carried as a Back Packer.
 

Back-packer Scabbard   # 38

Made  for Winchester 94 lever action
30 30   Trapper model with 16 inch
barrel.
 
Back=Packer set 2.jpg (2465200 bytes) Back-packer Scabbard   # 39

Made  for 30 30 carbine
  
DW1.jpg (321718 bytes)

Click image to see more detail
Super Deluxe scabbard  # 40

Scabbard for rifle with scope. This scabbard is lined
with soft leather and has a steel lining over the action
of rifle along with a removable boot. It has a removable
sling and handle and straps to attach to a saddle. The
edge is done in 16 plate rawhide braiding and Applique
braiding is used over the barrel.

You will not find a better scabbard
Tony.jpg (595287 bytes)

Click to see more detail
Back-packer Scabbard   # 41

Made  for 45/70 Marlin Trapper I made this scabbard
with
a steel lining over the action of rifle along with a
removable boot,
I also made a cloth sock to further
protect the finish on the rifle.

Let me make a custom scabbard to fit your rifle.

Slip.jpg (381225 bytes) Leather Rifle Slip #42

Slip is made in 7 oz soft oil tan leather, with a cloth sock
to further protect the finish on the rifle.
Ront 1.jpg (395102 bytes)

Click to see more detail
Rifle carrying case # 43  

Case is made in 10 oz saddle leather, with a soft leather
lining
, made to fit a 45/70 Marlin Trapper with a scope.
I put a steel lining over the scope, added a padded shoulder
strap, a fitted handle and straps to attach it to a saddle. The
flap is fastened by means of a strap running through a dee.

ibex.jpg (406322 bytes) Carbine Scabbard # 44

Made for a Henry Golden Boy 44 mag.
hn scabbards.jpg (521060 bytes) Carbine Scabbards # 45

Made for a husband & wife, with matching
Winchester 30/30's
Defender 6.jpg (552608 bytes) Shoulder holster for Tactical
Shotgun
# 46 
This holster allows you to carry a Shotgun with the
barrel up and the grip next to your hand. The top of
the holster is closed, stopping anything from entering
the barrel. The butt of the shotgun rests in a pocket,
just above your  hand, making it very fast to draw 
and easy to carry, even with a back-pack.
ball holder.jpg (111983 bytes) Pouch for balls   # 47


A pouch to carry balls, for muzzle loading rifles
Ball pouch 2.jpg (362539 bytes) Pouch for balls   # 48


A pouch to carry balls, for muzzle loading rifles
Friele11.jpg (500060 bytes) Shoulder holster for rifle  # 49

Made like # 30 but for a scope mounted rifle,
this scabbard has a steel lining over the scope
& action of the rifle. This scabbard was made
for a 300 Savage. There is a removable pouch
on the shoulder strap, to hold 7 cartridge's
.

ccase33.jpg (686762 bytes)  ccase11.jpg (959078 bytes)  ccase22.jpg (1138636 bytes)

Cartridge pouch # 50


This gives a open view of the cartridge case,
along with front and back view. Case can be
attached to a shoulder strap, or a belt. The
cartridge's are put in a holder so they do not
rattle as you carry them.
Garand2.jpg (482130 bytes) Scabbard for WW II M 1 Garand
# 51

This scabbard is made to replicate the scabbards
used in WW II for the M 1 Garand carbine. The
end of the scabbard has a plug, to protect the barrel
of the rifle and a raised plate to cover the loading pin.
Adam1s.jpg (383128 bytes) Saddle scabbard  with snow flap # 52

This scabbard is fully lined in soft leather, to protect
the finish of the rifle and  has a brass buckle to fasten
the snow flap.
Med33.jpg (550355 bytes) Back-Packer scabbard # 53

This scabbard was made for a Marlin Trapper
in 45/70.
I  custom make scabbards for all types of Rifles.
Bring or send me a pattern of your Rifle,
and I will make you a scabbard to
surpass your highest expectations.

E-mail for pricing.

( Click on the labels below to go directly to those areas )
Custom Made Saddles Saddle Bags
Chaps &Chinks Scabbards
Gun Leather Braided Work
Western Saddle Restoration English Saddle Repair
Saddle Fitting Additional Pieces
Learn the Art of Saddle Making Favorite Links & Web Rings
Home About us Terms

E-mail
sales@okanagansaddlery.com

Call Toll Free 1-877-723-3534        1 (250) 542-3364
Or Mail to
OKANAGAN SADDLERY
7979 Baker Hogg Rd. Vernon B.C.Canada  V1B 3S2

Terms are cash with order. All prices, F.O.B. Vernon, B.C.

Shipping & Customs, C.O.D.